0.5 ton reverse osmosis pure water equipment

0.5 ton reverse osmosis pure water equipment

  • Product:0.5 ton reverse osmosis pure water equipment
  • Catalogue:Labelling machines
  • Views:177419times
  • Update:2019/8/5 17:14:37
  • Call:133-6065-4218

Equipment features:

Since RO membrane is susceptible to the influence of PH value, residual chlorine and water temperature in water, it has strict requirements on inlet water quality before running RO membrane:

PH value :3~10 residual chlorine value :<0.1mg/L SDI15 value :<5.0 water temperature :<45℃

If any of the above indexes exceed the range, it is possible to deform the permeable membrane, thus affecting the effluent quality and shortening the service life of the membrane. Moreover, different types of membranes have different requirements on inlet water quality. It can be confirmed according to the instructions provided by RO film manufacturer before debugging.

RO reverse osmosis pure water system:

Production: 0.5 100 t/H

Water quality: < 1-10us

Main material: stainless steel/carbon steel

Control mode: IC/ HMI/manual

Type of membrane: rolled

Membrane shell: glass fiber/stainless steel

Price: customized

Operation principle:

The basic working principle of reverse osmosis is: use special high pressure pump, add raw water to 6-20 kg pressure, make raw water under the pressure of infiltration through the pore diameter of only 0.0001 micron reverse osmosis membrane. Chemical ions and bacteria, fungi and virions cannot pass through and are discharged with wastewater, allowing only water molecules and solvents with a volume less than 0.0001 micron to pass through.

The security filter contains a filter core with an aperture of 5 microns. These will filter out any particles larger than 5 microns. Protect the downstream RO film, otherwise RO film surface is easy to scale. The most commonly used percolating membrane is polyamide membrane, and the membrane type is rolled composite membrane, which can remove 99.5% salt.